-
**Type of device**
Sonoff Dongle
DSM 7.2
Linux 4.4.302+ #69057 SMP Fri Jan 12 17:02:28 CST 2024 x86_64 GNU/Linux synology_geminilake_220+
**Have the modules loaded?**
Yes. Or I think they are.…
-
@stefanrueger @mcuee I finally upgraded macOS on my old computer, and now libserialport is more broken than before. With macOS 10.14, only the CP210x chips didn't work properly with libserialport, but…
-
android code is as below
I checked Serialport is opened, then I write string data to arduino
` serialPort = UsbSerialDevice.createUsbSerialDevice(UsbSerialDevice.CP210x, device, connect…
-
Works fine with ATTiny13A and CP210x. But doesn't work with ATTiny44A, because when tried to connect I got this message:
```
Unconnected. > device com5
WriteDebug, byte…
-
I successfully converted noname RGBCW (3+3+3+10+10 w) led downlight which have bare BK7231T chip on led driver pcb with test points.
The issue is, what only one flasher reliably work with it is **…
-
I am using Ubuntu 12.04. I have used the PPA to successfully install the schwinn810 software and I have run the command to configure it (that all works). However, when I run the following command:
su…
-
Hello all,
I tired to configure the modes of external COM port via iot2050setup tool on the example image built from tag V01.04.02
Following is the behavior observed:
![image](https://github.com/…
-
When running usb-serial-drivers.sh I got an error mentioned below. Reason is that I've copy/pasted it from github and used notepad to create a file. The error was:
```
root@root:/lib/modules# /usr/l…
-
**Describe the bug**
Node UARTs do not provide output. The BMC UART and picocom from the BMC to each node does work.
**To Reproduce**
Steps to reproduce the behavior:
1. Confirm supported SoMs a…
-
```
I have an affordable (~16EUR) and compact programmer I tested with my Arduino
Mega (1280): myAVR mySmartUSB light.
http://shop.myavr.com/index.php?sp=article.sp.php&artID=200006
It has a Silabs…