-
```
ludo@idefix:.../esp8266/esp8266-dht22-sensor % platformio run -t upload
Building .pioenvs/esp01/firmware.bin
Looking for upload port...
A…
-
Currently the master is limited to the DS18B20 in OneWire mode and the slave is hardcoded to the AM2302
-
- Arduino board 1: ESP8266 / NodeMCU 1.0 (ESP12-E Module)
- Arduino board 2: ESP-WROOM-32 / ESP32 DEVKIT V1
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.13
- installed DHT-se…
-
### Is your feature request related to a problem? Please describe.
Not aa problem - a request
### Describe the solution you'd like
When adding an DS18B20 to #ESPresense under a tiny ESP C3 or…
-
I have two DHT22 sensors attached to a Pi Zero.
Sample Code:
```
from pigpio_dht import DHT11, DHT22
import pigpio
import time
gpio_1 = 4 # BCM Numbering
gpio_2 = 17 # BCM Numbering
pi…
-
- Arduino board: **Bluepill STM32F103**
- Arduino IDE version (found in Arduino -> About Arduino menu): **1.8.13**
- List the steps to reproduce the problem below (if possible attach a sketch …
-
I have built the Multisensor with a DHT22 and NodeMCU along with the TEMT6000 & AM312 PIR.
I'm using the same Pinouts as the Multisensor Video shows.
I've flashed this a couple of times using the e…
-
- Device: **RaspberryPi 4B**
- Sensor: **DHT11**
When running for a long time, errors are reported frequently.
![image](https://user-images.githubusercontent.com/23554202/121394196-ade07800-c983-…
-
Hello,
Since a few days im trying to make a new sensor equiped with the DS18B20 for temperature (and add later more sensors).
As hardware i'm using the Wemos D1 mini Pro and the DS18B20 sensor, …
-
Hi, I'm trying to use this very common sensor , but do not know how to do because it uses a function to retrieve values instead of analogRead. Am I wrong? How can I read values from sensors that a…