-
Hello,
I'm trying to read the data from my ISKRA AM550 trough the P1 port. The setup at the time is with a FT232 Serial cable into a raspberry py. The meter is provided by SIE Lausanne, in Switzerl…
-
I'm only getting hourly updated values on "Accumulated active import" and Export sensors, however I can see the number (circled in red below) updating every few seconds on the AMS Reader dashboard, so…
-
**Issue description**
My Pow-K is working fine, but as I use its data mostly in Home Assistant, I find it very confusing and annoying that there seems to be an one hour delay between the AMS reader a…
-
Hallo,
Ich würde deinen Code gerne für meinen TiNetz-Anschluß verwenden.
Ich hab jetzt deinen Code mal für mich angepasst und um MQTT erweitert. Es wird der selbe Kaifa-SM verwendet aber dadurch das…
-
Hi...
I'm not sure this is even possible, as i have no deeper knowledge into this topic.
The case is, that i bought a Pow-K (Kamstrup) module from amsleser.no.
I have fittet it into my Kamstrup O…
-
Hi,
I have a ESP32 devboard and an T210-D from EVN.
I'm facing this error:
[espdm:053] | Payload length is too big for received data
This is my yaml:
esphome:
name: meter01
platf…
smiyc updated
7 months ago
-
Hello,
Does the library supports DLMS/COSEM ?
If no any plans to support it ?
Best regards,
Etienne
-
Hi,
Thanks for open sourcing this. Did you not run into problems compiling GuruxDLMS?
I'm seeing:
/GuruxDLMS/development/src/gxserializer.c: In function 'ser_loadVariant':
/GuruxDLMS/developme…
-
Ive followed your instructions but now is stuck with the following error-message:
`
node smart-meter-mbus-dlms.js
/usr/src/mbus-dlms/node_modules/config/lib/config.js:853
throw new Error("C…
-
LG-E450 was installed in Switzerland by Romande-Energie who gives "Spécifications techniques Landis.pdf" telling data are pushed every 5 seconds on RJ12.
I have bought a TTL to MBUS slave module (1…