-
Hallo Peter,
gibt es eine Möglichkeit auf einem entfernten Raspberry im Heimnetz diese Sensoren auszulesen.
Eventuell bräuchten wir eine Daemon, auf dem Zielgerät ?
-- Christian
-
Add support for the one-wire sensor DS1820
-
Today I am struggling to get the DS18B20 to work with the Artemis boards. I have managed to get it to work with the RedBoard, and it seems that getting it to work is quite sensitive on the value of th…
-
Originally reported by: **blue (Bitbucket: [bluexp](https://bitbucket.org/bluexp), GitHub: [bluexp](https://github.com/bluexp))**
----------------------------------------
Trying latest version today…
-
When reading via pyDigiTemp I get inconsistent results, compared to DigiTemp.
PyDigiTemp;
```
root@sbcctrl:~/digitemp# python
Python 2.7.13 (default, Nov 24 2017, 17:33:09)
[GCC 6.3.0 201705…
-
Hi,
I use DS1820 to monitor temp. and control relay board for ceramic heater. But I really confuse about the setting.
- My day time temp. is about 30 and I want to control night temp. to 25. Ho…
-
Hi,
just two questions;
1. does the "flower" firmware work only with bme280 sensor?
2 I read here https://modkam.ru/?p=1671 that the measurement and transmission interval is 1 minute, is it possb…
-
### PROBLEM DESCRIPTION
connecting more than one PCF8574 to tasmota it generate an mqtt unexpectet publishing
### REQUESTED INFORMATION
- [x] Read the [Contributing Guide and Policy](https://gith…
-
Hi,
congrats for your nice driver!
I looks through the code and found something in halDS2482_CountDevices(). The docu says halDS2482_CountDevices() returns number of devices found. But coded is…
-
On the ESP32, GPIO2 must be driven low or floating for the ESP32 to enter the serial bootloader to flash.
The DS1820 sensor is set to use GPIO2 as the default pin and requires a 4.7k pull-up resistor…