-
[ESPDUINO-32](https://www.cnx-software.com/2017/09/04/espduino-32-wemos-d1-r32-esp32-boards-support-some-arduino-uno-shields/) with UART HL-340 (1a86:7523), flashed with NerdMiner firmware 1.6.3, flas…
-
I'm looking to use an Ultimaker 3 print head in a machine using RAMPS 1.4.2. It looks like everything in the print head communicates back to the controller over I2C. https://github.com/Ultimaker/Ultim…
-
Hi and thanks for all the work!
I am interested in building some of them myself. Looks like I have to order pretty much everything myself. Could you give some hints/links on how to do that?
I've…
-
i have an skr 2 with tft 35v3 installed on my chiron with 2209s and marlin 2x, everything works except when you print with the heated bed ,the layer lines in the print are all unaligned, with the b…
-
On my APU4 with Opnsense 21.1.1 and BIOS v4.13.0.3 I implemented the [workaround](https://github.com/pcengines/coreboot/issues/329#issuecomment-526217280) from @alexpro by setting `debug.acpi.avoid` t…
-
So in order to provide the high res 4-lane CSI, the i2c pins are needed. The i2s interface is also needed for sound capture from HDMI. By counterpoint, the CM4 exposes ADC interfaces on the SOM connec…
-
-
I recently bought this product, flashed the necessary uf2 and even though the keys are working, the leds are not lighting up.
![IMG_20240329_144309.jpg](https://github.com/Taro-Hayashi/KillerWhale/ass…
-
Hello!
I have a question - is it possible to define custom type of the pin, for example, electrical type, magnetic, thermal, signal, etc, and when wire is connected to this pin, it is highlighted wit…
-
Good Morning all,
Would it be possible for someone to add a page to the Wiki that explains the correct way to wire NC limit switches. maybe with a schematic drawn up. I have been confused about this …