-
I have been trying to run this python-obd on my Raspberry pi, but am facing some issues with some of the return values. I connect as follows;
```conn = obd.OBD(portstr="/dev/rfcomm0", baudrate=1040…
graus updated
5 years ago
-
Hi,
can you support us how we can add clear error on obd please ?
and send it by email or other share like whatsapp ?
and if we can add elm327 wifi its possible or not ?
-
i uploaded firmware_v5/can_sniffer/can_sniffer.ino
attatched OBD t…
-
```
I tested the application using ELM327 bluetooth dongle with honda city 2008 but
got the error. the error photo is attached. Please help me out.
```
Original issue reported on code.google.com b…
-
After install, I ran sudo modprobe bcm2835-v4l2, RoadApplePi was pulling video from the on-board camera for about 45 minutes, then stopped. I added bcm2835-v4l2 to the /etc/modules file and rebooted a…
-
```
I tested the application using ELM327 bluetooth dongle with honda city 2008 but
got the error. the error photo is attached. Please help me out.
```
Original issue reported on code.google.com b…
-
I am trying to get OBD information from a Toyota ETIOS car using [this OBD Bluetooth devuce](https://www.amazon.in/xcluma-Bluetooth-Diagnostic-Scanner-Android/dp/B073F386QJ?tag=googinhydr18418-21&tag=…
-
In this mode, the ELM327 behaves completely different.
Mainly the answers to a PID request are different.
THINGS TO CLARIFY:
Is it feasible to build this into the app? Do users need this?
I need a car…
-
http://www.ioactive.com/pdfs/IOActive_Adventures_in_Automotive_Networks_and_Control_Units.pdf
http://openxcplatform.com/hardware/vehicles.html
ford kuga elm327
http://www.ford-kuga.tw/bbs/foru…
-
"K-line is just a fancy name for a single-wire half-duplex UART running at 10400 baud and using 0/12V voltage levels. "
https://m0agx.eu/2018/01/02/reading-obd2-data-without-elm327-part-2-k-line/
…