-
I've been debugging lockup issues with twim and async cancelation in my project (investigation still ongoing), started reading the embassy_nrf::twim code to understand my problem and came across the f…
-
I'm using SPI to drive some WS2812 RGB LEDs (only using MOSI). On stm32, SPI::write/read calls finish_dma after the transaction, which disables the peripheral. That appears to leave MOSI & CLK floatin…
-
Hi,
STM32 H7 HAL does not seem to support VCO Wide Range mode. As a result, maximum frequency is capped at 420 MHz (H730 can do 550 MHz). Wide VCO range is 192 to 836 MHz.
Whole `pll` module would…
-
### Failing/Disabled Tests
- [ ] ESP32-C3/ESP32-C2: `uart::test_send_receive_different_baud_rates_and_clock_sources`
When using the `RcFast` clock source, the code just hangs in https://github…
-
Goal:
- Know some data in each room of the house (Kitchen, Living-Room, Office Room, BedRoom)
- Collect those data in a Prometheus
Data to collect:
- Light Level
- °C
- CO2 if possible
- humidity %…
-
👍🏻
I'd like to try and understand what will involved in getting Drogue-IOT integrated with the esp-rs ESP Rust Embedded community.
I see this project already uses Embassy, so this presentation mi…
-
Not sure how this issue happens but I got a panic in ring.rs.
I'm running this crate with embassy to create an actor framework on a tm4c123 micro controller.
Panic ->
```sh
panicked at /home/liev…
-
Am I missing something or is it impossible to change the style / formatting of the embassy-usb-logger?
Ideally I should be able to override this default with my own style with log levels etc.
http…
Kezii updated
3 hours ago
-
this could use an example for non-async, non-std.
i had to patch in a custom `getrandom` impl to use:
```
#[path = "espidf.rs"] mod imp;
```
for some reason `if #[cfg(target_os = "espid…
-
I noticed that this project reserved the crate embassy-avr: https://lib.rs/crates/embassy-avr Does this foretell AVR support in the near future?