-
Hi
I've an issue when running the tests. papirus-test fails at the animation (partial update) step. The screen is showing some parts of graphics and stuff.
i2cdetect -y 1 gives a 0x6f but no 0x4…
lawik updated
6 years ago
-
I noticed your post on mobileread after googling for mainline linux kernel deployment on a Kindle Paperwhite 3, and it is awesome that you've already got Fedora working... just without e-ink display w…
-
Hey joey 👋
Really nice project. Its unreal the amount of work you put in doing this , so kudos for that 👏
I was wanting to make one for myself (abridged edition).
However the display on aliex…
-
Hi,
I have a Waveshare 4.2inch ePaper display (black and white only), Rev 2.1 and I am trying to use it with a Firebeetle ESP32 board. I have connected it to the following pins:
_BUSY(PURPLE) --> …
-
### The problem
I am attempting to use online_image with my [Adafruit Magtag](https://www.adafruit.com/magtag).
I have successfully displayed the image once but all attempts now results in an error.…
-
Hi,
I am trying to display a test code on my new e-paper, but nothing comes through. Can someone help me?
I have the 10.3" with the driver board.
There is no code for python, so I am using …
-
### The problem
The build of the RPi Pico W firmware fails as soon as I add the `service` section in the `api` section.
Without the `service` section I have no problems.
The `service` section was…
-
I have been doing some serious prototyping, for months, with all these boards: B-L072Z-LRWAN1, GrassHopper and a custom board with a Murata module. I have mostly used your core but also the "official"…
-
By now you know this repository is crap. This is what worked for me on a 1.54 e-ink display. It should work on other sizes as well.
NOTE: This display requires 3.3 data lines. It works on 5v data l…
-
### Board:ESP32
### Display:Waveshare Ink 2.13inch/2.9inch
### I modified your 4.2 part of the code and modified some of the pins. When it worked with epaper2in9.py, my display worked perfectly.
!…