-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Hass.io on Ubuntu 18.x in Docker
**ESP (ESP32/ESP8266, Board/Sonoff):**
NodeMcu v3 LoLin
**Affected component:**
http…
-
so i noticed there is a new version of the atc thermometer.bin
the 3.5c as i figured it fix the issue that LYWSD03MMC should be only sending info every 10 min to save battery life
but really…
-
Since updating the glow yaml to 1.2 and esphome to 2021.8.0 the LED on my glow sensor is constantly on where as prior to this it flashed in sync with the pulse of my smart meter.
Is there a setting…
-
Hey guys, I had to rebuild my HomeAssistant instance and finally I decided to give ESPHome a Try... this is like the 10th time I rebuild the YAML, folder, wipe, clean and try again with the same resul…
-
**Describe the problem you have/What new integration you would like**
Within HA, it is possible to set an icon_template for a cover, to allow the icon state to change when the cover opens/closes;…
srk23 updated
4 years ago
-
Пробую компилировать в epshome пишет ошибку
`INFO Reading configuration /config/esphome/gatekeeper.yaml...
INFO Detected timezone 'MSK' with UTC offset 3
Failed config
uart:
- [source /confi…
-
After successfully connecting to my desk (using a Linak DPG1M004-00) and WiFi, I ran `getHeight` to get my device's current height. This is what I got, followed by a rebooting ESP32.
```
abort() w…
-
Allow to add existing Esphome nodes to a new Hassio instance. I understand that the yaml code can not be recovered this way. However, it would help to be able to add existing nodes created with an old…
-
I don't know if this is already possible:
I want to monitor the temperature on a wifi that isn't directly connected to my homeassistant.
Is it possible to have esphome report to a remote homeassista…
-
**Operating environment/Installation (Hass.io/Docker/pip/etc.):**
Debian 10 (Buster), with pip in a venv
(This issue affects all installs of stable 1.14.3 though.)
**ESP (ESP32/ESP8266, Boa…