-
Hello,
I'm reaching out to inform you that I've tested all versions, and unfortunately, after 20 days of utilizing this board, the Ethernet port has ceased to function. It is unable to assign or re…
-
Quote from @MJoergen in a Skype conversation:
Here's an idea for M2M version 3 (or whatever): Add ethernet support (UDP and/or TCP) in QNICE, and then let it read files from a network file share. F…
-
**Is your feature request related to a problem? Please describe.**
When I use the Hardware Showcase Wallpaper, my ethernet controller is displayed at the right bottom. However, I don't use Ethernet, …
-
I am needing an ethernet RJ45 connector to create a wired connection, making this firmware + ESP32 a competitor to routers that suffer throughput performance when running a lot of small UDP packets.
…
-
Hi,
I'm trying to use the Zephyr DHCPv4 sample with an ESP32-WROOM and the W5500 Ethernet shield. I have added the specific overlay and configuration files to the project. These are similar to the Ac…
-
### Testing environment:
iroh-net version: v0.27.0
server (Linux, Windows),
client (Windows).
client is a laptop that supports both Wi-Fi and Ethernet connections.
### Result
1. When…
-
Hi
When deploying k3s via EIB, k3s will not start if there is no ethernet cable plugged in into the device.
This results in:
```
[FAILED] Failed to start Network Manager Wait Online.
[FAILED] F…
-
Does this library allow for parsing of packets on devices with multiple network interfaces? Can't seem to find much in the way of the examples.
It looks like the E131 library did allow for this.
-
Hi, First of all, thanks a lot for these wonderful kernel and builds.
**Device**: NanoPi R6C
**Issue**: This device has 2 ethernet ports(1G and 2.5G), upon connecting to any router using the 1G po…
-
The need is to enable and define the compression of the Ethernet Header data on top of a Radio Link.
A new attribute could be added to RLT interface:
-- rw header-compression-mode