-
### Describe the issue you are experiencing
After upgrading to 12.3 my HA started bootlooping. Noticed that after I disconnected my Aeotec Z-Stick ZW090 it booted again and ran fine (without my Z wav…
-
The latest version of Space Engineers from steam, with app id 244850 seems to require a patch which wine-staging has.
Yes, I did leave out my system specs as it's not important to this issue. (Prot…
-
# Compatibility Report
- Name of the game with compatibility issues: Red Dead Redemption 2
- Steam AppID of the game: 1174180
## System Information
- GPU: AMD Radeon VII
- Driver/LLVM version: …
-
- Pump model, for example S100202 (Square)
- 6 wires to pump, 4 to display (in a 6 plug)
- PCB v2
- Red LLC
- Software (from GitHub yesterday)
Thought all was going well, Node MCU flas…
-
(Side comment you can skip -- Based on the interest in this project I went ahead and spent some more time (a lot actually) in ghidra looking at the boot loader code and managed to get the ppsMmcTool.t…
guino updated
1 month ago
-
Hi, I have 3 bt bulbs and 1 wifi/bt smart plug. I've been using cync2mqtt which connects via bluetooth but, I can't get connected to the smart plug.
My bulbs are controlled by a dumb switch so the…
-
so digdat0 says the aircraft shows the version he tried to drowngrade to. he says now he has version mismatch and compass error. i figured id start this new issue in case he comes back. heres a link t…
-
The device boots fine when connected to USB. When it is connected to 5V as well, the relays open and close fine. When it's only connected to the USB, but not to 5V, only the close relay works, the ope…
lptr updated
10 months ago
-
### Bug description
ZHA just stopped working. Noticed because lights one by one went offline. Stuggling even to identify correct error message.
I'm using home assistant green + skyconnect (EZSP…
-
### PROBLEM DESCRIPTION
Is it possible to use Tasmota on the new [SONOFF POW Elite](https://sonoff.tech/product/diy-smart-switch/pow-elite/)?
I found some Pictures [here](https://notenoughtech.com/h…