-
Hi,
I am trying to send “Hello world” with the SX1276 module and an Arduino Pro Mini (3.3V 8MHz) to The Things Network with the ttn-abp example provided (Version 4.1.1). I am sure that my SX1276 i…
-
This library is used in the guide article, [Adafruit Learn: Feather + Raspberry Pi Weather Monitoring Network with LoRa or LoRaWAN](https://learn.adafruit.com/multi-device-lora-temperature-network/usi…
-
I'm using CircuitPython version 7.0.0 on the Feather M0 Lora board. Also using a Beitian BN-220 GPS.
Getting this error when trying to parse GPS:
main.py output:
('GPGSV', '3,3,11,21,28,129,21,27,…
-
Been working with rfm95 featherwing for hours & hours over the past week and have finally narrowed down the erratic behavior to the receiver disabling itself every other save. It toggles between worki…
-
I'm building a pipeline that uses arduino-cli and the sketch.yaml project definition to build my code. However, I'm in europe and so need to use the LMIC_REGION_eu868 region. In the [readme](https://g…
-
Hi Adafuit.
I use your lib on Adafruit Feather M0 and getting randomly a reset after many minutes. The idea was to use:
`Watchdog.sleep(250)`
instead of
`delay(250)`
to save power. It works and r…
no-go updated
2 years ago
-
**Summary**
With LMIC v4.1.1 our Feather M0 stops waking from sleep after ~2000 transmits/sleeps. The issue does not occur with v4.1.0, with all other variables kept the same.
We are using th…
-
Hey @drewtenn this looks super interesting, was wondering if you could share more details about which pins you attached the jumpers to, I can't figure it out from your README.
Thanks in advance
loopj updated
2 years ago
-
Found a defect in the package definition while attempting installation of the "adafruit:samd" core:
`Error during install: tool arduino:bossac@1.8.0-48-gb176eee not available for the current OS`
-…
-
**Describe the bug**
Dendrometer had a 6 week deployment and in their code, they measured the Vbat pin through the Analog module. The values for all of the devices had a battery voltage starting from…