-
### Cura Version
5.4.0-beta.1
### Operating System
Windows 11
### Printer
FlashForged Adventurer 3 pro
### Name abnormal settings
default (works in other projects)
### Describe model location
…
-
Emailed the vendor:
> Date: Friday, 23 August 2024 at 11:48
> To: support@flashforge.com
> Subject: FlashPrint 5 download links
> HI folks,
>
> The download links for FlashPrint 5, at: ht…
-
### Discussed in https://github.com/xblax/flashforge_adm5_klipper_mod/discussions/12
Adding this issue as a place-holder for future integration of a touch-screen UI solution using the ADM5 built-in…
xblax updated
4 months ago
-
I have a Flashforge Creator Pro but seeing approx 5% loss in x and y measurements when using gcode instead of x3g.
I have fixed the x-axis by changing the default "Steps per mm" x-axis from 94.1176…
-
Hello! Sorry if maybe I'm posting in the wrong place. I'm very new here at Github. Couldn't find another place to write. I have a Dreamer NX connected to Octoprind and am using Prucasl3ser. Prucaslic…
KeltE updated
2 years ago
-
Phone states it's connected and on dev/bus/002/002
GPX brings up Replicator options as well as the standard Erikson one.
Serial port defined in OP is /dev/tty/Octo4a Buad Rate: 11520 Pri…
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
v2.0.0 Official
### Operating System (OS)
Windows
### OS Version
…
-
Using this module causes my printers to stop and lock up.
Both of my Adventurer 3s will completely lock up about 5-6 hours into a 12 hour print while this module is running on HA. This typically wi…
-
I've seen some friends install LEDs on their AD5M and want to ask how to install it
-
I'd like to clean Noisebridge github by archiving unused/old/useless repos
# Keep
Infrastructure
python-nb-donate
donate.noisebridge.net
meetthings
NGALAC
rfid-access-control
sparkle-switch
…