-
has anyone come up with a way to pipe a thermal sensor into a vlc type feed? can this setup be repurposed for that? If you output the analog video signal and use a analog to digital IP converter for t…
-
Hello,
I'm using your Lepton module FLIR, and I'm trying to use the v4l2 program for converting module to a dev / videoX. But the result is not satisfactory
I'm using Raspberry (raspbian). I got the…
-
### Steps to reproduce
1. Run code below:
```
import sensor, image, time, fir
drawing_hint = image.BICUBIC
fir.init(type = fir.FIR_MLX90640) #P4 to SCL and P5 to SDA
w = fir.width() * 10…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### ⚡ Feature Request
For vision L3X-Z uses a pan/tilt head consisting of two Dynamixel MX-28AR with 2 x OpenMV [OpenMV Cam H7 R2](https://openmv.io/collections/cams/products/openmv-cam-h7-r2) …
-
When I tried running the program it gets stuck on line 156 of Lepton.py and I'm not sure why. It was working a minute ago, but now it just keeps detecting all readings as garbage frames.
-
How do I retrieve per pixel temperature readings from the captured Lepton image?
-
Hi,
in the description it is stated the Lepton "including the radiometric versions (Lepton2.5 only at the moment)" are supported. Is this still correct or is Lepton 3.5 (the radiometric version) supp…
WolfZ updated
2 years ago
-
Hi,
I checked the code is based on USB_CAM node. I am using flir lepton with purethermal2 board. I get the Display image but not the thermography data.
Any scope for that? or any link for the same…
-
Hi
I am making a SAR drone and in order to detect people I was determined to use the FLIR Lepton 3.5 with its breakout pin v2 board.
I have wired it as written below:
FLIR pin1 - GND - pin 6 Jet…