-
Debug on HA is showing depreciation code changed as follows
2024-01-06 18:14:55.392 WARNING (MainThread) [homeassistant.const] SPEED_KILOMETERS_PER_HOUR was used from freeathome, this is a deprecat…
-
In the logbook i see this warning:
`Entity None () implements HVACMode(s): heat_cool, off and therefore implicitly supports the turn_on/turn_off methods without setting the proper ClimateEntityF…
thvd updated
8 months ago
-
For about 2 weeks I have been having major problems controlling the free@home components in Home Assistant. For example, I can close 3 roller shutters and when I want to open them again, sometimes it …
-
### Problem description
These devices are marketed in the Netherlands as Qube wallmount LED light. (see example: https://letsleds.nl/product/qube-wandlamp-led-6watt-zwart-220volt-ip65-rgbw-cw-zigbee/…
-
### Problem description
**Product:**
- Smart Switch based on TS0004
- Model: ZG-003-RF
- Input: AC/DC 7-32V / USB 5V
- Output: 10A/Gang
**Zigbee logs:**
- Manufacturer: _TZ3000_wkr3jqmr
…
Woll3 updated
4 months ago
-
Hi,
I have a wether station from Busch Jäger and it triggers a wind allert, if the wind is high over a certain amount of time. I see the weather station in HA, but not the wind alert. When wind aler…
-
After updating the FW of the sysAP from v2.1 to v2.2.4 the bridge is offline (Communication error)
The port numbers are the same as before (80, 5222, 5280). Please let me know if I can provide you …
-
**Describe The Bug:**
There is the following error
[17/09/2023, 17:11:08] [My free@home Setup] Received message has an unexpected type! {"00000000-0000-0000-0000-000000000000": {"datapoints": {},"…
-
**Describe The Bug:**
The dimming actuators from Busch Jeager do not show up in the apple home app. Normal light switches work, dimmers do not.
**To Reproduce:**
Connect to free@home system with …
-
**Describe The Bug:**
Not all free@home thermostats are added to Home app
**To Reproduce:**
Try to add free@home system with basic and comfort thermostats
**Expected behavior:**
All thermosta…