-
### Tool
nanoff
### Description
Hello,
working with the ESP32-S3 DevKit C and try to deploy the firmware. Interestingly, if I run with --update, the program runs without errors, while the error sh…
-
DS logic SP解码没有问题,但是QSPI解码 命令位+地址位解码的和Saleae logic不一致,从DS logic无法读取flash所发送的command及地址
![DS logic](https://github.com/DreamSourceLab/DSView/assets/163628644/5c1df6ad-0308-46ac-9c3f-47b80672b846)
…
-
Or anything else... Maybe I'm dumb and I the chip is useless or damaged but every time I try to erase its conntent:
```
flashrom v1.3.0 on Linux 6.9.8-arch1-1 (x86_64)
flashrom is free software, …
-
thanks to @WizzardDr who added this new layout which needs a new Keil compiler target: https://github.com/RoboDurden/Hoverboard-Firmware-Hack-Gen2.x/pull/15
As i am not really experienced at all wi…
-
i have found 3 sets of these boards, but unfortunately no firmware as far as i understand it. found this issue a while ago, but still no sollution. https://github.com/EFeru/hoverboard-firmware-hack-FO…
-
**Describe the bug**
A clear and concise description of what the bug is.
When compiling on Linux I get the following error about `_close`, `_getpid`, `_kill`, `_lseek`, `_read`, and `_write` not b…
-
Hello,
I'm not very good at this stuff, but I think the current [variant.h](https://github.com/technoblogy/serpente-core/blob/master/samd/variants/serpente/variant.h) file lacks the configuration n…
-
### Tool
nanoff
### Description
When using command:
`nanoff --update --target ESP32_S3_ALL --serialport COM18 -v diag`
Nanoff is unable to flash device (or it take long time? I've waited only f…
-
The docs for the Lemp12 state that it has a "Macronix MX25L25673G flash chip". Is this really correct?
Both my machine and the image in the docs (https://tech-docs.system76.com/models/lemp12/img/co…
-
Hello,
I have tried to install the platformio platform but I can't.
This is the error I get:
```
Tool Manager: Installing platformio/toolchain-gd32v @ ~9.2.0
Error: You do not have permissi…