-
I would like to ask you for help to resolve my problems with running rtknavi.exe. I am trying to set a processing system using RTKLib for a demonstration campaign which aim is to deliver ZTD values in…
-
Hello
I am using USRP N210 to capture GPS L2 signals, the provided config script in the 'conf' folder contains several typos. It still fails to track any satellites even after I correct those typo…
-
@dkati @OrdenKrieger I open this so there is a place for jf discussion, actually the features broken here are bt/nfc, camera (we miss all changes needed for legacy devices so it's normal) and ril, al…
-
It takes a way longer time (5-10 minutes) until a stable GPS can get established every time.
It works ASAP on the stock firmware, maybe only slow on the first time.
I just wait 1-2 hours and establis…
-
```
There are more and more devices, with positioning support appear on the market.
There are tablets, UMPCs, UMIDs, Subnotebooks, Communicators, Mobile and Pocket
PCs, smartphones and even ordinary…
-
I'm trying to a process with PPP-AR mode. I put the FCB file I downloaded from here (https://github.com/FCB-SGG/FCB-FILES) or the jxfXXXXX.fcb file I downloaded with the net_diff program in the P1C1 D…
-
Is it possible to use this library on the UBX M8P for RTK purpose (base-station)?
configure dynamic model
get the RTCM3 corrections (1005, 1077 and 1087)
If not, do you plan on supporting it, is …
-
Hello,
Exporting data to GPX format worked fine in September 2016 for my first generation Holux RCV-3000 (using a Mediatek MT-3329 chip for GPS only) with:
Mageia Linux 5.0 + gpsd v3.11 + GPSBabel…
-
i was used rtkrcv in the arm board with ublox m8n gps module and the NTRIP base server, i found an issue that rtkrcv can not got the FLOAT or FIX solution int rtkrcv first running the start. It's alwa…
net21 updated
8 years ago
-
Dear Dr. hirokawa,
Thank you for providing this powerful tool for SSR-PPP learners.
However, I have one question about applying ionosphere-free bias correction to clock offsets in sisre analysis…