-
Hi!
I flashed a svlinky 0.2 with a config from here https://github.com/arduxio/zmk-ardux.git editing its config/west.yml to:
```
manifest:
remotes:
- name: zmkfirmware
url-base: …
-
When I try to upload I get this error
```
In file included from c:\Users\****\Documents\Arduino\libraries\TFT_eSPI\TFT_eSPI.h:48,
from c:\Users\****\Documents\Arduino\libraries\T…
-
Hello
I try to switch GPIO of a Meerstetter TEC 1089 as in the attached file
```
from pyMeCom.mecom import MeCom, ResponseException, WrongChecksum
from serial import SerialException
…
-
there seems to be a issue regarding the level property. This has been observed on the mini robot z33 and on the f15.
```py
read: I (2450) gpio: GPIO[34]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pull…
-
Hi there, we are interfacing the FT2232H with a slave device using pyftdi, using SPI for communication. We can write to the device, and it responds correctly on the logic analyzer. However, the ret…
-
#### Summary
Addressing the issue of current draw by certain GPIOs when enabled, with a focus on optimizing power consumption.
#### Affected GPIOs
These three GPIOs are drawing current when enabl…
-
Recently, i upgrade my AGX Orin from `Jetpack 5.0` to `Jetpack 6.0`, but jetson-gpio seems doesn't work anymore. Any idea why? and how to solve this issue?
According to my observation, setting the GP…
-
Hello,
I was trying to play around with [Interrupt Handling](https://www.atomvm.net/doc/master/programmers-guide.html#interrupt-handling) on my ESP32. I did run the example form documentation, and …
-
We need that for CS, MOSI, and SCK pins going to the RF.
-
The tutorial leads the LED to blink and connect to GPIO 13. After configuration and gds, the GPIO fails to open everytime and displays an error on GPIO 6. The RateGroups also display warnings and the …