-
I was under the impresssion that the 2018 40kWh Leaf is currently not suported by OVMS since the OBD port in the 2018 LEAF is now behind a gateway, so it no longer hears any passive CAN traffic requir…
-
I am running a TFT 35 E3.0 using firmware BIGTREE_GD_TFT35_V3.0_E3.27.x (Pre-Compiled)
Mainboard SKR 1.3 with tmc 2209 steppers in UART running marlin 2.1.2.2
I cannot get a stable connection be…
-
**Is your feature request related to a problem? Please describe.**
With the present, amazing thinq support, it is not possible to get access to the data from the many sensors in an LG HVAC system.
…
-
See attached image. I figured a pic is worth a thousand words, in this instance.
![DIYBMSV4_relay_wishlist](https://user-images.githubusercontent.com/68650201/88437193-2e75a480-cdc3-11ea-9b33-93d9da2…
-
Hi,
Im seeing some strange temp probe tracking at higher temps (around 35dec C) As seen in the graph, the fridge temp all of a sudden begins to follow roughly the same temp as the beer temp. (see blu…
-
Hello,
i've upgrade 12 ATC device with your zigbee firmware perfectly for about 4 months now.
Suddenly, on of my device stop reporting. The value is always 24.11° and 63.11% for humidity.
On the …
-
To streamline project work and notifications across multiple printers and multiple jobs, it would be helpful if we could retrieve a minimal amount of information from the Bambu Labs Cloud:
- Printe…
-
### The problem
I have a Samsung AE12BXYDEG/EU ASHP which is connected to SmartThings and from there to HA. Neither the official integration nor the HACS version (which I know is out of scope here) …
-
I have an enviro urban and I'm looking to use it to continuously collect data instead of on a schedule, since I can keep it plugged in to USB power. I did some quick hacking of the firmware you have a…
-
I recently replaced the motherboard with a silent board from gigdigit and after swapping I keep getting this E1 error. I checked that all my cables were set properly but it didn't help. I just swapped…