-
While the addition of "Only send PLI and Chat messages over Meshtastic" option has significantly reduced the volume of traffic forwarded to the mesh, there is still an excessive amount of data being f…
-
Hi
I tried to use an Lora Example provided by heltech on arduino IDE.
Somehow my Boards keep crashing with a checksum error:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x5 (DSLEEP),bo…
-
Hi I'm unable to load the **package_heltec_esp32_index.json** via the arduino board manager. [Here](https://raw.githubusercontent.com/occino/WiFi_Kit_series/master/package_heltec_esp32_index.json) you…
-
Hello
I tried to complie the esp32-heltec-balancer-ble-example.yaml file and modified it a bit for the use of my wemos S3-mini
esp32:
board: esp32-s3-devkitc-1
framework:
type: esp-i…
-
The display uses the Heltec library
#include "heltec.h"
is instantiated with
Heltec.begin(true /DisplayEnable Enable/, false /LoRa Disable/, true /Serial Enable/);
and use the functions as
**Helt…
-
(base) edgar@edgar-inspiron3493:\~/pycom-micropython-sigfox-heltec/esp32$ make BOARD=HELTEC
Use make SECURE=on [optionally SECURE_KEY ?= secure_boot_signing_key.pem] to enable Secure Boot and Flash E…
-
Hello, I have a Heltec Lora 32 v3 board because a Lora 32 v2 board was no longer available. Is it possible to adapt the software for the Lora 32 v3?
-
I'm trying to use SoftwareWire on a Heltec Wifi Kit 32 (ESP32 board) and I keep getting a compiling error
Below is the code I'm trying to use to test. its the i2c_scanner but i replaced Wire with…
-
Hi Roland,
I have moved parts of my previous issue report to a different thread, to hopefully cleaning up communication.
device: Heltec Wifi_Kit_32_V3.1
After not being able to flash `spidr_1…
-
### Current Situation
With the original rtl_433 version and an SDR stick I can retrieve the BRESSER 7-in-1 weather station with the following command: rtl_433 -f 868.2M -s 1000k -X 'n=Bresser-7in1,m=…