-
Hi!
Thanks a lot for your great job!
I've took WEMOS D1 mini and done all the instructions, then connected it to CN-CNT port, but it doesn't work. HA integration is OK, but it doesn't control my AC …
-
I'm currently using Optiboot with a baudrate of 115.200bps on a board with 14.7456MHz.
Using AVRDUDESS (avrdude gui) on Windows, I can connect to it no problem.
But when flashing urboot, I can't…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### What happened?
My car constantly goes in to a state of sleep and awake. This started as soon as I started usi…
-
## Description
or have an insuls module so they can actually do anything
-
### A new board from Lilygo published.
### It uses ESP32S3(N16R8) as controller,and uses ED047TC1(Soft ver.) as display.
I try to make a patch to my own code,but arduino IDE only throws a lot of(99+…
-
See also issue #53
In addition to the preferred analytical representations of the instrument response function (IRF), it should also be possible to use a so-called reference convolution algorithm,…
jsnel updated
8 months ago
-
### The problem
Hello, I was moved here from [HAOS operating system](https://github.com/home-assistant/operating-system/issues/3371)
In short, after updating HAOS from version 12.2 to 12.3, I ca…
-
### Describe the issue you are experiencing
I copied it from another issue:
> * Exact RPi model (for 3B please distinguish between 3B and 3B+).
i7-7700T HA OS in KVM on proxmox
> * Boot me…
-
Hello. I have a doubt. I do not really know what is the trigger and how should I use it? I need to adquire data to a buffer and save it to a file only when the input in a channel is bigger than a spec…
-
Hello. I have one simple question.
The ADC buffer fills continuously. After a trigger is found a counter with 8192+trigger_delay samples is started. When it gets to zero, the source changes to idle.…