-
Hi, first, I would like to thank you for your amazing work.
I used a Waveshare 3.5 C with a pi zero, I have a great image and I'm able to push it to 125MHz. But I have drops in framerate when I play …
-
## Issue description
I installed NixOS on bare metal in a computer of mine this last weekend...and graphics did not work. They just stop updating after a certain point in the boot, however, the OS…
-
- [ ] application_development/external_lib
- [ ] application_development/out_of_tree_board
- [ ] application_development/code_relocation
- [x] crypto/mbedtls_benchmark
- [ ] mpu/mpu_test
- …
-
Arduino Due + ILI9341 TFT + Adafruit libs (IDE 1.6.3): Arduino SPI extended mode does not work:
when I start the test sketch by the following code, the program shows no TFT output, screen is light gre…
-
- Arduino board: Arduino Uno
- Arduino IDE version (found in Arduino -> About Arduino menu): 1.8.9
- List the steps to reproduce the problem below (if possible attach a sketch or
copy the s…
-
List of users to convert:
**Boards (DONE)**
Module | Assignee | PR | Done
------ | -------- | -- | ----
boards/arm/actinius_icarus| @anangl |#20798|✓
boards/arm/degu_evk| @anangl |#20798|✓
…
-
Hello, I bought a display on the e-shop website https://arduino-shop.cz/arduino/1568-shield-lcd-tft-2-4-display-for-arduino-uno.html unfortunately not supported by you . I found that the following dem…
-
**Describe the bug**
Hello everyone, Someone could help me?
I was trying to run the sample/gui/lvgl on nRF52840 with adafruit Adafruit 2.2 inch TFT Display.
I built the image and flashed on the boa…
-
The Portmaster was not able to initialize the nfqueue. This might be connected to #82 - but in that case the error later changed to not being able to initialize iptables itself.
**What happened**:
…
-
```
src/ili9340.c:659:25: error: & has lower precedence than ==; == will be evaluated first [-Werror,-Wparentheses]
if (h == (ph-2) & _FONT_UNDER_LINE_)
~~~~~~~~~~~~^
src/ili93…