-
Since upgrading from pg 7.4.1 to pg 7.7.1, we are getting "Client has encountered a connection error and is not queryable" error in production after a week of working just fine, but no additional info…
emlai updated
1 month ago
-
We noticed that after enabling AD authentication on our Graylog 1.2.2 the first attempt was always unsuccessful, while the second was always successful.
So I did a packet dump during the logins to tr…
-
Some newer devices have flash configurations that are not supported currently by MCUboot. This issue attempts to collect these in one place to help with the design of any solutions to handle this situ…
-
It would be great if we could easily adjust the delay time between each slide transition. I can adjust the speed, but when I slow it down to the speed I would like, the transitions are stacked on top …
jhull updated
5 years ago
-
Hi @vitalif ,
I tested the performance of vitastor without RDMA.
Below 32k (4k, 8k, 16k performance is higher than ceph, latency is lower than ceph)
Above 32k, including 32k (32k 64k 128k 256k 51…
-
@phutchins Currently, the plugin processes all the documents in the collection and infinitely waits/listens for new documents. I am trying to make the process exit once all the documents are read, so…
-
When my WebSocket client try to reconnect, it is set to closing the original connection first. Howerver, the target WebSocket server is in a proxied environment behind nginx. It might times out after …
-
**Describe the bug**
Until OCPN 5.6, my set-up received NMEA0183 data from my NMEA2000 network via an Actisense W2K converter that sent the data over WiFi. So OCPN receives the data as NMEA0183.
No…
-
Hi there,
While I recently tried to align Neuralynx data with data simultaneously recorded using a Nihon Kohden system, I stumbled upon the discontinuous data loading error that has previously been…
-
### What happened + What you expected to happen
My time series comes in hourly format and it spans several years. It has 149,016 rows in total.
The below code was running for 30 minutes until I in…