-
Fully documented here:
https://forum.microchip.com/s/topic/a5CV40000000b1BMAQ/t394578
TL;DR :
use case : TCCx timer set as PWM pulse train generator. DMA in charge of setting the duty cycle of t…
-
Do we want to implement BLE workflow on Espressif ?
It could be an alternative to web workflow or enabled by default, solving the problem of the creation of `.env` which otherwise requires serial acc…
-
Tested on itsybits M0 and QT Py M0. The uart loses characters during reception at 115200 bit/s.
A PC with serial interface is connected to RX of the device and sends 26 characters (a-z) every 300ms…
wohai updated
3 years ago
-
Thank you to everyone for the work on the UF2 bootloader.
I'm using a SAMD51 (SAMD51J20A) custom board. The USB CDC works perfectly with the Arduino IDE, however I've been having some trouble getti…
-
TLDR:
```sh
jos@josverl-sb5:~/micropython$ mpbuild build RPI_PICO
╭─ Build rp2/RPI_PICO ─────────────────────────────────────────────────────────────────────────────────────────────────╮
│ …
-
### CircuitPython version
```python
"I am on CircuitPython 7, and tried reverting back to 6.3, same results on both."
```
### Code/REPL
```python
# If you have an AirLift Featherwing or …
-
We rely on `newlib` as implementation of the C standard library and some standard UNIX APIs. This is generally furnished by ARM with their GNU toolchain.
In the past, @tannewt has observed that Ar…
-
I am trying to get FastLED working with Adafruit's ItsyBitsy nRF52840 Express. I know support is considered experimental but so far, it is not working at all :(
Here are details:
- FastLED vers…
-
I started revamping our Motor Testers last year including making the new CCM5D controllers.
We need to make sure all of our Motor Testers are working and if we have the time, improve them and if need…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.0.0-alpha.4 on 2021-07-08; Adafruit ItsyBitsy nRF52840 Express with nRF52840
```
### Code/REPL
```python
# boot.py
usb_cdc.enable(cons…