-
https://github.com/rusefi/rusefi-hardware/tree/main/tle9104-breakout
* convert to kicad 7
* fix paths considering current location
* export BOM and CPL files into "export" folder
* TLE9104 use j…
-
After making the merged PCB I zip the gerber files and try to upload to Oshpark and JLCPCB. On Oshpark it fails completely and on JLCPCB it will upload but will show nothing in the gerber preview are…
-
I am in the process of developing flex PCBs. JLC requires a dedicated layer for outlining the Stainless Steel stiffener with the specs included in the zipped gerber. My current work-around is to draw …
-
between https://support.jlcpcb.com/article/192-how-to-use-jlcpcb-global-sourcing-parts-service and sometimes availability of BM2LC105FJ-C on mouser what is level of effort to create a compatible versi…
-
Hi Guys,
I have a StrongSpa G2 with Balboa GS501SZ + 5 Button VL701S top panel.
I have the PCB setup by JLCPCB and connected to the Spa as follows:
DISPLAY-------->(RJ1) PCB (RJ2)--------->(J1)…
-
Hi Sir,
Well got your order with many thanks~
Sorry to bother you, but there is an issue that we want to confirm with you before proceeding.
As shown below, the plated slots in your file are to…
-
Hello, I am interested in getting some USB ports to attach to a colorlight board. I am following your instructions on ordering from JLPCB:
https://github.com/nand2mario/usb_host_pmod/blob/main/doc/…
-
hello great project and seen this on LTT and want to build this great project. However i have never ordered hobbyists pcbs. whom are you using for this project? i wouldn’t mind ordering a few boards …
-
Hi !
First thanks for creating that project, it is a very nice idea. I wanted to build 2-3 of these for my A1200 and a friends, I mostly use JLCPCB's manufacturing process including components sour…
-
AFAIK, the design uses a lot of components from LCSC. LCSC cooperates with JLCPCB for board making and assembly.
While JLCPCB is willing to add some LCSC parts on request, however JLCPCB explicitly d…