-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
When the Digilent Atlys is still running the firmware which ships with the board (supplied by Digilent) the SPI flash is automatically configured in QSPI mode which openocd doesn't know how to talk.
…
-
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "hla_swd". To overrid…
-
I am unable to connect to STM32F767ZG
```
Open On-Chip Debugger 0.12.0-00017-gb153daa14 (2023-02-03-14:58) [https://github.com/STMicroelectronics/OpenOCD]
Licensed under GNU GPL v2
For bug repo…
-
I am using Numaker-etm-m487 evaluation board, and I get this.
```
> sudo openocd -f eclipse/OpenOCD/scripts/interface/nulink.cfg -f eclipse/OpenOCD/scripts/target/numicroM4.cfg
Open On-Chip Debug…
-
### Board
ESP32C3 Dev Module
### Device Description
ESP32C3 Dev Module is selected for the board.
The physical board uses Seeed Studio XIAO ESP32C3.
### Hardware Configuration
Built-in USB only.…
-
I am using Ubuntu 19.10 with CLion 2019.3 with an ESP32-WROOM DevKitCV4 attached to an FT232H USB via JTAG pins and the following configuration:
```
OpenOCD Download & Run:
Board config file: board…
-
**Is your feature request related to a problem? Please describe.**
I'm currently working on support for the JH7110 family of SoCs from StarFive.
**Describe the solution you'd like**
I'm havi…
-
there are several ftdi based jtag probes, like flyswatter2, bus blaster, xds100 and others
even all use same/similar chip, mpsse settings are different.
in pyftdi it is hardcoded. for example openoc…
-
always when i try unlock STM i get that message.:
Open On-Chip Debugger 0.10.0-dev (2018-09-20-12:54)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.…