-
It seems that the function u8g2_GetUTF8Width has a problem on utf8 cyrillic (and may be other) strings.
The string "СупердиÑкотека 90Ñ…" ie:"Супердискотека 90х"
return 19
While t…
-
I made a small board with Arduino and IR receiver and couple of buttons for favorite preset selection.
After sending a few commands to the Radio like Serial.print("cli.play(\"5\")\r"); or Serial.prin…
-
Is everything OK with it? Is this correct size of 6x11 pixels as declared? As to me it seems to be bigger than u8g2_font_6x12_tf. Could you, please, check it? Many thanks!
-
Hi,
so far Ka-Radio32 runs well on Heltec LoRa32 Wifo Kit, just the OLED uses different IO. Seems to be using some pins which are currently reserved for ENC & LED. Any change to get that working?
…
-
C:/msys32/home/user/Ka-Radio32/components/bt_speaker/bt_speaker.c: In function 'bt_av_hdl_stack_evt':
C:/msys32/home/user/Ka-Radio32/components/bt_speaker/bt_speaker.c:87:36: error: 'CONFIG_BT_NAME' …
-
Hi,
I attached an SSD1306 Oled today on my Ka-Radio32 ESP32. It's an I2C display without an RST line.
![karadio lcd](https://user-images.githubusercontent.com/10114857/34677712-442c262c-f491-11e…
-
Hi,
I would like to try Ka-Radio 32 on my DOIT ESP32 DEVKIT V1 board, but hit a problem.
I downloaded:
http://karadio.karawin.fr/KaRadio32.bin
and
http://karadio.karawin.fr/KaRadio32sup.zip …
-
What pins should I use?
-
Any idea to resolve the following issue when running this command.
make -j5 clean; make -j5; make flash
issue:
...
..
.
CC build/libsodium/libsodium/src/libsodium/sodium/version.o
CC build/…
-
Great job writing all these display libraries. I tried the ST7735 libraries with ESP32 (Arduino IDE). It kind of works.
I was very much interested to make st7735 work with espressif SDK. So far I ha…