-
[ESP-BSP](https://github.com/espressif/esp-bsp) is standard a mechanism how to work with a board.
The initialization sequence in case of M5Stack CoreS3 includes also Power Up of display using AW952…
-
I have set with LCD, but when it is hanged outside it will be usable to have possibility to turn it off for daily usage. I added switch on Vcc line, but when turned off and on displays show garbage. P…
-
**Description:**
I am working on a project to connect the B-CAMS-OMV camera module to the STM32H747I-DISCO board to stream video onto the inbuilt display. However, I’m facing difficulties getting the…
-
**Description:**
I am working on a project to connect the B-CAMS-OMV camera module to the STM32H747I-DISCO board to stream video onto the inbuilt display. However, I’m facing difficulties getting the…
-
IDE：Arduino IDE
chip：RP2350
Configuration：
![Uploading 企业微信截图_17307959277624.png…]()
Using the screen：3.5 LCD
Screen driver：ILI9488
The problem：
When rp2040 uses TFT_eSPI library to drive ILI…
-
I have a new display coming which supports capactive touch using a cst816d driver.
**Describe the solution you'd like**
Add support for cst816d and cst816t touch.
**Describe alternatives you'v…
-
Hello,
I need your help to improve my script.
Specifically, I need valid configuration for as much LCD models as possible :
1. All `/boot/config.txt` values you changed, most importantly, `hd…
-
**Description:**
I am working on a project to connect the B-CAMS-OMV camera module to the STM32H747I-DISCO board to stream video onto the inbuilt display. However, I’m facing difficulties getting the…
-
Waveshare ILI9486(B) https://www.amazon.com/dp/B07V9WW96D
dtoverlay tree not loaded
Unable to draw to display using luma.lcd with any examples or demo code, screen remains blank with backlight on.
…
-
Just asking because on the list of hardware on that one spreadsheet it only lists;
LCD Display, Battery, Power Regulator, Raspberry Pi, Ribbon Cable, Amplifier, Speaker, Motor, and Mini Relay but I w…