-
Hello,
I've been having some awful difficulty trying to get some LED strips to work using SPI. Everything works fine using PWM (GPIO 18) but if I use SPI (GPIO 10) the LEDs will only turn white and…
-
I bought a BT CSR 8150 A10
USB ID is identical
1.zadig successfully installed the driver
2.when starting setup.bat I get the following problem
TypeError: Cannot read property 'on' of unde…
-
According to your earlier response ...
"Freenove_WS2812_Lib_for_ESP32.zip is not designed for ESP32S3. In fact, it is designed for Freenove_ESP32_WROVER_Board. LEDS_PIN is also used for ESP32."
My…
-
Blend start and end pixels to make patterns circular
-
### CircuitPython version
```python
Adafruit CircuitPython 9.1.1 on 2024-07-23; Waveshare ESP32-S3-Zero with ESP32S3
Adafruit CircuitPython 9.1.3 on 2024-08-30; Waveshare ESP32-S3-Zero with ESP32S3
…
-
Any chance of creating this for the new DASHBOARD 2.0 ?? I've just had my first play with the new dashboard (dashboard 1 will not be supported in future - hence the flowforge dashboard 2) it has the b…
-
Hello, my issue is that only about 1 third of the LED strip lights up.
I don't know if I did something wrong.
-
Following the python library update, extend support in hacs for white led light.
https://github.com/andreasnuesslein/py-teleco-daisy/issues/4
-
Hi all,
After trying to resolve the issue 46 by unplug and plug the power a couple of time also waiting more than 5 minutes between the unplug and plug, I’ve noticed that the color red during the s…
-
I'm using the jcl-rv12is fork and currently have reverted to the led_sectional.ino file as published, except I changed pin number to 14.
I'm not seeing the LED updated for the final airport (K11R)
…