-
I read the wiki and some issues, but I didn't find answers to my questions.
If I didn't search well, please help me to find the correct link!
Scenario
--
I have a Buderus Logamax plus GB062-24 a…
ghost updated
3 years ago
-
I have this thermostat and I saw that ems-esp is not able to send commands to it.
Of course I'd like to do so.
What can I do in the course to help you integrate this model ?
-
The Bosch MB LANi gateway exposes Junker and Bosch heaters to Bosch SHC with deviceModel name "HEATING_CIRCUIT" and a HeatingSystemInformation service as parent.
` {
"@type": "device",
…
-
Hi all,
I have a heating system consisting of the following:
- Logamax plus GB162 - 15
- Logamatic 4121 + MEC2
- Solar module FM443
- water tank Logalux PL 750 /2SW
EMS-ESP is running on wem…
-
Is only a 'Modem' device, but maybe it can be added to the configurations to be dicovered on the bus.
The Buderus Logamatic Easycom with address 0x13: [https://ibb.co/k1F0nzZ](https://ibb.co/k1F0nzZ)…
-
First of thank you very much for this custom component.
Today I found some time to play around with your custom component and mostly works.
For water_heater.dhw1 and climate.hc1 current_temperatu…
-
@bbqkees: I found an issue with my hardware (and probably all derived ones).
Running in USB powered mode (using a D1 Mini Pro) Tx works like a charm.
In contrast, when running in EMS powered mode t…
-
My Boiler buderus logamax u52-28
Termostat Logamatic TC100
Via telnet, enter the 'devices' command:
These device IDs are on the EMS Bus: 0x08 0x09 0x18
and 3 were recognized by EMS-ESP a…
-
Dear proddy,
I have the above boiler and control unit, both are from the year 2000.
As I do not find both devices on the list of supported devices, I like to ask if there is a chance that your EMS…
-
Hi guys,
i have the SM50 which was recognized as Solar Module in 1.7.0.
(except the negative value for total energy [https://github.com/proddy/EMS-ESP/issues/96#issuecomment-500239534](url) everyt…