-
Hi,
Your package is a lifesaver as very few thing work on OrangePi out of the box. But it seems that there is no downlinks receives. I don't know if it receives Ack either. Can you confirm ?
Kind …
Di-Ny updated
2 years ago
-
I have the Adafruit M0 LoRa feather, and I am very new to LoRa and LoRaWAN.
I've cloned the latest master branch of this repo and made a few changes:
1. In 'config.h' I've commented the line for E…
-
- [x] The issue is present in the latest release.
- [x] I have searched the [issues](https://github.com/brocaar/chirpstack-network-server) of this repository and believe that this is not a du…
-
**Project:**
Design Secure DIY Concentrator for HIP-22
**Elevator Pitch:**
We propose designing a 100% open-source DIY Concentrator hardware prototype for use as a reference impl…
-
Hi there,
So I've ditched the default Lorank8 install and switched to this project (kudos!) for provisioning a couple of gateways. But since the upgrade all the nodes are missing the OTAA activatio…
-
I'm having difficulty getting my Seeed WM1302 (based on SX1302) SPI concentrator to start. It is mounted in the Seeed WM1302 Raspberry Pi HAT on a Raspberry Pi 4 (64-bit) running Raspberry Pi OS Lite …
md4k9 updated
4 months ago
-
@terrillmoore
Dear Mr. Terry Moore,
Thanks for your efforts and providing such a good library. I am trying to connect Arduino Uno with Adafruit RF95W LoRa module (EU433 Mhz), however it doesn't w…
-
Health status messages are mentioned in the online documentation Transmit Confirmation section:
"There is no feedback to the LNS if a frame could not be sent (e.g., because it was too late, there…
-
If I understand your wiki completely, you're only dealing with 2 level of abstraction for the routing table.
As I understand it, it almost impossible to reach a node in a large network (let's say on…
-
we can detect the chip being sx1303 or sx1302, can be useful for some things in the future i guess
sx1302...
```
root@64709de465a7:/opt/iotloragateway/packet_forwarder# /opt/iotloragateway/packet…