-
While defining a new kernel I was stumbling over the following:
There is a condition for #if IS_ESP8266() || IS_ESP32() and in the
and in the #else we have some logic where I am not sure for which …
-
### Operating System
Linux
### Arduino IDE version
2.0.3
### Board
PICO rp2040 from RP
### ArduinoCore version
PICO/RP2040 community 2.7.0
### TinyUSB Library version
release
### Sketch & Co…
-
Per https://community.platformio.org/t/request-to-add-platformio-support-for-earle-philhowers-arduino-pico-raspberry-pi-pico-sdk/22285.
As simliar to e.g. STM32 and AVR with `board_build.core = ..`…
-
### **Background:**
I have been having trouble setting up reliable communications between 2 Pico boards using i2c
I started off using Earle Philhower's Arduino-Pico RP2040 core for testing this as…
-
Hello,
It is great that support for the Pi Pico has landed in the latest version! I am wondering though. Are there any examples that show how to program the PIO through either Arduino IDE or throug…
-
When trying to compile the program ntp-client with the Arduino IDE and after few adaptations to allow for that (comment stdio_init_all() and a couple of castings as well as introduce setup() and loop(…
-
Raspberry Pico
How to determine which pins are used for SPI, and how to do this for SPI1. Are there any standard pins?
Same for I2C. Is there any API (with examples)?
-
Please could you add support for the new [RPi Pico (RP2040 MCU)](https://www.raspberrypi.org/products/raspberry-pi-pico/)?
It is a Cortex M0+ chip but I don't think any of the existing platforms co…
-
Hi everybody,
I'm trying to run "LoopBackDemoArduinoUnoNoInt" example on Arduino Giga R1 (I was able to run the ACAN2517FD library on Rapsberry Pico).
Each time I open the Serial Monitor the ske…
-
Hi Max,
we found a problem. When we try to start the debugger using J-Link on macOS, we always get the following error:
```Listening on TCP/IP port 2331
Connecting to target...
Connected to ta…