-
My application works fine with the 1.1.4 release for the NANO BLE. Updating to 1.1.5 results in a wire compilation error. Then updating to 1.1.6 results in a failing application. The activity on the b…
-
Currently, each sub-module of CMSIS uses a different naming style (for example, in DSP, function names use lowercase and underscores, but in RTOS, function names use camel case.). A unified naming sty…
-
Hey,
I have a problem with my 33 BLE and Nano Connect. I work with a MCP23017 (an I2C Shift Register) and I want to read out the values of its ports inside an ISR after an external interrupt. But b…
-
### Description of defect
I am trying to build a TLS server for an embedded device (nucleo-144 stm32f429).
I took as a guideline this example from mbedos (https://github.com/ARMmbed/mbed-os…
-
Not sure if the rtl8762c can support the AWS via the cellular modem.. which is something done in the FreeRTOS. https://github.com/FreeRTOS/Lab-Project-FreeRTOS-Cellular-Demo
If yes, can we contract y…
-
The last days I tried to gain access to the Nordic SDK below the mbed layer. My application needs tight timings and the mbed timers caused to much jitter. Therefore I tried going with the hardware tim…
-
### Description of defect
I first reported [this](https://github.com/arduino-libraries/Arduino_Pro_Tutorials/issues/21#issue-1073045588) bug at [arduino-libraries/Arduino_Pro_Tutorials](https:/…
-
Currently the firmware weighs in at 1013853 bytes flash and 48352 bytes RAM during upload (before dynamic allocation during operation). This is pretty hefty and we should look into what's going on. …
-
How to debug an Arduino program with the Segger J-Link?
- Core: Arduino Mbed OS RP2040 Boards
- Board: Pico RP2040 board
- Option: `-g3 -ggdb`
- Programmer: Segger J-Link
The mbed RTOS plug-…
-
Using 8 out of the box new `Arduino Nano RP2040 Connect` boards, I have a problem with all of them concerning the library [WiFiManager_NINA_Lite](https://github.com/khoih-prog/WiFiManager_NINA_Lite).
…