-
Hi,
I am using your code with my Feather 32u4 Lora board. I have amended the lmic_project_config.h file as instructed (CFG_eu868 1) and I have added the 3 TTN keys. When I compile, I get the error …
-
Hello
I am currently trying to use a MKRZERO and a RFM95 module to connect to the TTN in order to periodically send and access sensor data. I have been trying to use this library for the past week…
-
I use ESP32 DOIT V1 dev board and HopeRF RFM96 radio module. I add required library, edit platformio.ini file and could compile the sketch successfully. When upload code into dev board, device reboot…
-
I was looking to integrate parts of your Lorawan code into my own project (ESPEasy) and I came across a few small issues.
First to make it clear where I borrowed the code from (the credentials part…
TD-er updated
2 years ago
-
Hi,
I have been testing this library configured for AU915 today but I am having some issues.
## Background:
- Tested with an 8 channel gateway and loraserver/chirpstack (not TTN) - both working…
-
Base question/issue: I can't get LMIC_PRINTF_TO working on SAMD21. Tried with Arduino 1.8.6 and 1.8.12 on Windows, both with current LMIC. When I uncomment #define LMIC_PRINTF_TO Serial and set LMIC_D…
-
With the current master changes, tried to build the example sketch in catena 4450 and catena 4612. While doing the step clear the FRAM and redo the provisioning.
Then join not happening, EV_JOINING …
-
I'm trying to run default examples without changing nothing, but i've got some errors.
How i can resolve?
Thanks
```
C:\Users\o.dimanno\Documents\Arduino\libraries\ESP32_LoRaWAN-master\src\reg…
-
Hi,
My sketch is based on the example [simple_sensor_bme280.ino](https://github.com/mcci-catena/arduino-lorawan/blob/master/examples/simple_sensor_bme280/simple_sensor_bme280.ino)
I am using a mod…
-
Hi,
I have been testing my device under different fail conditions such, in this case I was testing what happens with an ACK is not received on a confirmed packet.
What occurred was that the packet…