-
```
Hi,
I've created a new patch for the 0.4 DuinOS version.
This patch allow (like the old one) usage of DuinOS on Mega and Mega2560
boards, with 1.0.x arduino software.
To apply my patch, just re…
-
Hi have just set up a mega with a 2 differant ramps 1.6 boards and the 20x4 reprap controller.
I have succesfully loaded the firmware on . all the parts have been used and I know there working
no mp…
-
```
What change would like to see?
The SPI library examples should explain (and use) the pre-defined pin number
constants MOSI, MISO, SCK, SS. Well, at least SS should be used on
DigitalPotControl…
-
Hi
im use arduino mega2560 and two 64x32 16s. all good fore one panel but when add new pane as series all of screen one showing on screen two.
i want show a text on screen one and new text on screen…
-
Just getting started with this but immediately ran into an issue on verify in Arduino IDE.
"Sketch uses 32322 bytes (100%) of program storage space. Maximum is 32256 bytes.
Global variables use 10…
-
```
The boards menu is really overwhelming and we need to simplify it.
Possibilities:
- auto-detecting the microcontroller / bootloader baud rate
- limited selection of boards that's customizable i…
-
A simple program (say, Blink) that includes more than 64k of pgmspace data (for MEGA, MEGA2560, MEGA ADK, various 1284 boards) will fail to work correctly.
One of the reasons is that Arduino.h include…
-
When will Arduino use Zephyr instead of mbed? End of Life is announced for mbed platform.
-
```
What change would like to see?
The SPI library examples should explain (and use) the pre-defined pin number
constants MOSI, MISO, SCK, SS. Well, at least SS should be used on
DigitalPotControl…
-
```
What change would like to see?
The SPI library examples should explain (and use) the pre-defined pin number
constants MOSI, MISO, SCK, SS. Well, at least SS should be used on
DigitalPotControl…