-
First of all, thanks for your Python module, it is going to be very useful for me I think.
I have installed `alsaaudio` in order to perform PCM capture in Python (2.7.13) on my Raspbian Stretch-lit…
-
## Describe the feature
Everything in my stream is a silent movie. I've ordered an i2s MEMS mic module to connect to the Pi, but does MediaMTX support recording audio when using the PiCam source? A…
mo-g updated
10 months ago
-
### CircuitPython version
```python
Adafruit CircuitPython 9.0.0-alpha.6 on 2023-12-12; Adafruit Camera with ESP32S3
```
### Code/REPL
```python
>>> import board
>>> dir(board)
['__class__', '__…
-
Great project! I've been having fun building it (it's quite an elegant design). Many thanks to the originator(s) for their hard work!
I did some minor mechanical modifications and used a RPI 4B. …
-
I've the follow setting
Raspberry Pi 4
RPi Imager 1.7.5
Debian Bookworm 10/10/2023
debian version 12.1
IQaudIO Codec Zero (Black edition, pre-rebranding)
Copyright IQaudIO Limited 2019 (PCB …
-
# Confirmed working in esp32 idf 5.1 alpha 3.0.0
The INMP441 mems mic is the culprit. The working theory is that when the I2S clock stops the microphone goes into a power down mode and then generat…
-
Firstly, output some data to the terminal to show that the microphone is generating data.
20h00
-
Im currently trying to run the ESP32 example.
Unfortunately im struggling to understand the Output. It does look like its not working properly but I dont know what the Problem is.
Here is the Ou…
-
Hey,
I have issue's using the INMP621 microphone with PDM.. I can't get correct data from it to calculate the noise level(dB). When there is no special sound. The data is always around 976 and does…
-
## Bug report
**Problem**
When I set the effect interval from a key on my remote control, the interval is set. After it writes the value to json storage it then starts a loop where the jso…