-
#### Problem
Due to pin conflicts the EFR32 MG21 cannot use the LCD on the WSTK to print the QR code as it is done with the EFR32 MG12 familily.
This breaks the Android app capacity to find the …
ghost updated
3 years ago
-
Hi all. I have some questions regarding the efr32 platforms' entropy implementation.
1. Why is the ADC used instead of the TRNG in efr32mg12 and efr32mg13? I know that there is an erratum associate…
-
#### Problem
With either Lock_app and Lighting_app running on a EFR32MG21 (Board 4180A) when starting Thread network on a MG21 (BRD4180A) leads to Hardfault after a serie of calloc with done by the …
-
### PROBLEM DESCRIPTION
A new sonoff zigbee bridge was successfully flashed using tasmotizer and following this documentation (official link in the tasmota docs): https://zigbee.blakadder.com/Son…
-
#### Problem
Running a EFR app on a EFR32MG21 board hard fault when starting FreeRTOS scheduler.
Doesn't occure with MG12 familly
#### Proposed Solution
Must be a configuration issue that var…
-
#### When I use chip-device-ctrl to configure a device, an error is displayed
chip-device-ctrl and device commit：test_event_3_2021_06_03
#### bb8a6ef6ded5718caf855b1067300d19aba0a524
@jmarti…
-
#### Problem
Lock-app example doesn't build for EFR32MG21 family.
#### Proposed Solution
Fix mbedtls included to support MG21
-
**Have you looked for this feature in other issues and in the docs?**
Yes
**Is your feature request related to a problem? Please describe.**
No related problem. This is only a feature…
Hedda updated
3 years ago
-
#### Problem
The lock-app example doesn't compile when specifying a EFR32 board of the MG21 family. ex.: make BOARD=BRD4180A
The example seem to have been generated for specific device (from the MG…
-
### The problem
Hi,
Since the upgrade to core-2021.4.x, ZHA "Reconfigure Device" causing zigpy modules logs level to switch to debug until next core reboot.
Is there a way to switch it back to …