-
Sometimes, when you include a key found by `mf_nonce_brute` in the dictionary, trace list will suggest the same `mf_nonce_brute` command line. It's because the key is not the good one.
In our case,…
-
The new MIFARE Classic special/magic cards "Gen3" should be configurable using Android. The configuration commands are just issued using the APDU structure: https://github.com/RfidResearchGroup/proxma…
-
### Document Links
README.md
### Description of the problem
The README says RESET Pin: RESET GPIO27.
The output of the test program says something different:
mifare_classic_interface_debug_print…
-
Hi,
I would like to know if there is a way to make miLazy working even with a Mifare card with a fixed nonce, also known as prng fixed. I've been trying so hard to make it work but, even changing som…
-
```
I cloned a mifare classic card onto an empty card.Now everytime I write to this
card I get a error like this:
[code]failed to write trailer block 3
xnfc_initiator_transceive_bytes: Timeout[/code…
-
```
Reported by emanuele.bertoldi, Apr 11, 2011
Currently, there are equivalent examples for MIFARE classic and desfire.
It would be great to add an example for MIFARE ultralight too.
```
Original i…
-
```
I cloned a mifare classic card onto an empty card.Now everytime I write to this
card I get a error like this:
[code]failed to write trailer block 3
xnfc_initiator_transceive_bytes: Timeout[/code…
-
I want to use this project to read and write Mifare 1k cards, I know the values for KeyA and KeyB but I can't find the proper combination to perform the read and write over the card.
There is a way f…
-
Actual code provide basic low level sniffer for (PCD/PICC) ISO/IEC 14443A when using dnfc2 => sniff command
`T_SNIFF (Test special sniffer ST25R3916 MCU_CLK(PA5) and CSI CSO)`
It requires a Logic An…
-
I have an ACR122 and wanted to see if it was possible to use this code to clone a Mifare 1K.... using a Magic Tag?