-
# [HDMI2USB-misoc-firmware 27] Add "hardware mixing" support to HDMI2USB firmware
More technical details at [following github issue](http://github.com/timvideos/HDMI2USB-misoc-firmware/issues/#27)
# …
-
Hi Dev,
I'm pretty new on Litex & Migen development. Trying to make support board Z7lite from Microphase (china). I buy it cheap from Aliexpress.
![z7lite (2)](https://user-images.githubuserconten…
-
The bit stream was loaded on to the board and it was hang at Liftoff while loading firmware to the board with the command ("litex_term /dev/ttyUSB1 --kernel=firmware.bin"). Here I'm using nexys4ddr bo…
-
To reduce the amount of code duplication we should subclass from `litex` platforms' `_io`, `connectors` and methods instead of redefining them. This will prevent surprises and subtle incompatibilities…
-
_From @mithro on July 29, 2014 8:39_
I don't know how many test benches we have or their quality but we should support running them and error out when they fail.
_Copied from original issue: timvide…
-
# Brief explanation
Create a serial port extension board - Support both RS232 and RS485 modes
Should also have lots of blinking lights.
Firmware should be modified so that they appear as USB-CDC po…
-
I installed fomu-toolchain-linux_x86_64-v1.5.6 on Ubuntu 20.04 which lacks libffi 6 (7 is the only package in the repos). Working through the workshop I encountered an error building blink.py in the m…
-
Hello,
I was working on similar project.
My problem was that Vivado has too slow start and it was much more effective if it was running as a backend server and the client was sending the jobs fo…
Nic30 updated
5 years ago
-
I think it's a great idea to split the buildenv from the firmwares.
The problem now, though, is that I have to have files in the platform, target, and firmware directories specific to a given appl…
-
Hi Tristan !
So I'm trying to use a ghdl+yosys conversion of microwatt to verilog in order to be able to simulate it in the LiteX environment.
The end result isn't quite working, but debugging t…