-
Hello, I want to read and print the values stored in holding registers 00 to 03, and I succeeded with Modpoll, but when I tried with this code in python, the result is None
ps: My python version is 2.…
-
I'm a little bit confused about the numbers in the -t parameter:
Function code 03 are holding registers, used with -t 4
Function code 04 are input registers, used with -t 3
Intentional?
-
Hello @gavinying
Please consider upgrading `pymodbus` to version 3.2.2.
Reading https://github.com/pymodbus-dev/pymodbus/blob/dev/API_changes.rst, minor changes will be necessary in code.
Unless …
-
Hello,
thanks for this great piece of code!
Unfortunately I have a small problem, when writing data to Modbus. The value is received, but when publishing to Modbus something goes wrong.
```
…
-
### Describe the issue
I try to use the integration with an USB-to-Serial Stick via MODBUS connected to my Huawei SUN2000-10KTL-M1. Because the Modbus-TCP connection via the SDongle is very unstable …
-
I'm [playing around with modpoll](https://github.com/StealthChesnut/HA-FoxESS-Modbus/wiki/USR-W610-Setup-Guide#troubleshooting-usr) and the W610, and I can fairly reliably perform large (>50 register)…
-
Hi, are you planning or do you have somewhere a working version that would allow you to read data from Foxess, but bypassing HA.
So that it could be fired straight from the python interpreter?
-
I tried to run:
//
from pymodbus.client.sync import ModbusTcpClient
client = ModbusTcpClient('myStaticIP, port=myPort')
client.connect()
rr = client.connect()
print rr
client.write_coil(1, True)
res…
-
Thank you for the first beta integration, when adding it to HA i'm receiving the following Info:
H3 Inverter - USR-610
_Originally posted by @benbeton in https://github.com/nathanmarlor/foxes…
-
Hi,
thank you for this great project.
I found out today that my converter generates a local echo and it can't be turned off.
So my question is if an option can be added to remove local echoes.
Th…