-
### What happened
I have hybrid hardware, and it was initially enabled, but due to doing some debugging I set it to CoreXY mode.
Rather than changing my wiring, instead when I changed to corexy, I…
-
Currently we're using the `SP` command, which retrieves the set position. However, it won't work if the motor is moving, so we return `None` in this case. There's also a similar artificial limitation …
-
- [x] Start the step motor
- [x] Stop the step motor
- [x] ajust the speed for less noise and less movement for each package
- [ ] detection of the power mode of the motor
-
It would be nice to have a feature such that the built-in motor encoder can be automatically reset to a user specified value when either connected limit switch is hit.
-
Hello,
Background: This is a project that has been locked in upgrading due to incompatibility (will be upgraded sooner or later to latest WC), but for now it will run with this version.
Upon ins…
-
I meet some problems when I tried writing a motor driver for my Step Motor Controller by modified motorVMC and motorAcs in Motor module. I have tried many times, but there are still some problems in m…
-
### Device model / 设备型号
[dmaker.fan.p33](https://home.miot-spec.com/s/dmaker.fan.p33)
### Component version / 插件版本
0.7.19
### HA core version / HA版本
2024.8.1
### Integrated mode / 集成…
-
## Component list
- Motor.
- LM35 Temperature Sensor.
- HY-SRF05 Ultrasonic Sensor.
- 3 buttons.
- Red LED.
- USB to RS232 converter.
- Resistor 1K Ohm.
## Schematic
![PepsiCity_Scheme]…
-
Hi, I'm starting using this grbl, as I have a CoreXY plotter with Servo Motor on Z axis.
The Servo Motor receives a kind if interference (it makes noise and moves quickly and short) when the main …
-
- we rely on cheap continuous rotation analog sg90 servo motors for the flippers/ears on the RSC
- they cause vibrations, noise and electrical feedback noise when operating
- no position feedback mea…
mbz4 updated
2 months ago