-
I try this fork,very good jobregistering Mqtt device in Home Assistant,
but unfortunatelly i cant get data from:
Battery_charge_current_voltronic
Battery_redischarge_voltage_voltronic
PV_in_curre…
-
Hi. I noticed the end date for this facility is incorrect.
Today is 19th feb.
I select last 30days and it shows 27dec to 24th Jan.
There has been no output generated since 24th Jan.
https://…
-
### What happened?
Hallo, da ich hier Jungs vom Fach und Entwicklung habe folgendes Problem, ließt man oft:
Ich besitze einen Hoymiles HM-800, dieser produziert insgesamt 810,9W (siehe Bild Shelly…
-
Please find attached a different RS485 protocol document, sent to me by IC GOGOGO Store for the BMS I bought from them.
I have also just received their RS485 Dongle.
The Dongle plugs into the BMS bu…
-
![image](https://user-images.githubusercontent.com/80992172/147910491-10fd2cb9-e04b-4e79-ac60-16c0dd1f3671.png)
![image](https://user-images.githubusercontent.com/80992172/147910584-583a9978-eb62-41b…
-
Easun ISolar SMV III 5kw inverter.
Windows 10 host -> Virtualbox -> Ubuntu -> Docker
Ultimately recognized as HID device /dev/hidraw1, where I don't have control over baud rate in windows host.
>…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Current Behavior
some functionality of the MPP Solar is not working
### Expected behaviour
MPP Solar functio…
-
Hi,
Just wondering if you have considered adding Schottky diodes in parallel with R1 & R3 3.3 ohm gate resistors?
At a guess you currently have somewhere around 100ns-150ns gate switching times …
-
Hey, very cool project!
Recently I also thought about a wind turbine MPPT, but I considered a buck converter (battery at low voltage side, wind turbine at higher voltage side) as most suitable DC/D…
-
### What device are you using?
comfirmed mmp solar hybrid V2 5kw (yelow) P18
important: start flashing realese V1.1.0.. configure.. check read inverter data an then upgrade to V1.1.4... re…