-
Hi
Can anybody show sketch converted to 2 Relays and 2 Buttons ? I dont know how to convert it... please help me
Convert it
https://github.com/mysensors/MySensorsArduinoExamples/blob/master/examp…
ghost updated
11 months ago
-
Hey,
i am sorry for opening an issue but i dont know where i can just ask or write a personal message to a contributor (thanks github). So i need to do it on this way - again sorry!
Is the very …
-
Hi all,
In my opinion, the ack flag is not processed correctly. Currently the messages are sent with ack request and the ack flag is set in the iobroker as soon as the ack confirmation arrives.
Howe…
-
Reported on the forum:
https://forum.mysensors.org/topic/8814/cleareprom-does-not-work-for-sensebender-gw
When clearing eeprom, operation is halted.
-
[branch master - version 0.14.0 - Using serial gateway - NO asyncio]
When presenting a new sensor node it sometimes happens (about 50% of times) that an extra Node ID is generated with all keys set…
-
Did you change anything for the dualoptiboot bootloader?
-
I'm working on a smart Thermostat for my smart home (200+ smart devices).
There w…
-
The idea is to make something like this:
Ethernet IR Blaster with ESP32-POE and Broadlink RM Mini 3
[https://community.home-assistant.io/t/ethernet-ir-blaster-with-esp32-poe-and-broadlink-rm-min…
-
When I enable ACK on the Gateway settings for a MySensors MQTT gateway, setting the ACK enabled setting to on seems to prevent any message being sent. When I enable that the resource logs show no mess…
-
Version tested: 2.3.2 / 2.4-alpha
Version 2.3.0 does not produce this error / debug message.
RPI gateway configured with:
```
./configure
--my-transport=rfm69
--my-rfm69-frequency=868
…
tobof updated
3 years ago