-
### Description
Trying a simple local BGP route-leak via VPN between a VRF and default VRF (GRT) leads to time exceeded in-transit because from VRF to GRT all routes points to dev `lo`.
### Vers…
-
Unable to parse output for command 'show ip nhrp nhs Tunnel1 detail' (Missing keys: [['Tunnel1', 'nhs_ip']])
mydevice#sh ip nhrp nhs Tunnel 1 detail
Legend: E=Expecting replies, R=Responding, W=W…
-
This is seen in Release 9.0, 9.0.1 and latest master as of Sept 25, 2023 (sha 1c829fac8)
I have a topology as follows:
```
R1 ========= R2
| |
| |
R4 ========= R3
``…
-
### Description
Hello, after working on the compatibility between OSPF and DMVPN/NHRP ( #15171) I am now working on OSPF HMAC SHA256 authentication, nd I have followed the following example in your …
-
**Describe the bug**
When administrator deploy custom configuration (frr.conf), that is compatible with `frr` (frr service startups with this configuration without any errors), `frr-reload` helper …
k0ste updated
3 weeks ago
-
### Description
If an interface flaps (even one not used by frr), the routes previously configured into the kernel are lost; I can only reproduce this using ECMP.
I have attached a `Vagrantfile`…
-
There should be host routes in the rib table,or the conflicting route as shown below can’t be solved.
```
(lo: 1.1.1.1/32) -[R1]-(eth0: 172.24.177.146/24)------------(eth0: 172.24.177.148/24)-[R2]-(…
-
Good day everyone, I hope someone out there can shed some light on this problem.
What I would like: Multiple VRFs each containing one or more VLANs, and route between them inside the L3 switch. I c…
-
**Important notices**
Before you add a new report, we ask you kindly to acknowledge the following:
- [x] I have read the contributing guide lines at https://github.com/opnsense/core/blob/master/…
ip6li updated
5 months ago
-
## Context
I installed calico in my brand-new IPv6-only kubernetes cluster and I'm experiencing connectivity issues with my pods. Right now, it is setup as a node-to-node mesh with 3 nodes which are …