-
I am able to run "Drawbot_image_to_gcode_v2" and upload a .png file. I can see the image getting created on the display window. After pressing "g", multiple .txt , .svg and pdf files are created in th…
-
# Description/Steps to reproduce
Run the code below in the sketch editor:
Click around, adding new circles. Every new circle should have all existing geometry subtracted from it before it is pla…
-
RespeQt has simple printer emulation which also allows translation from ATASCII to ASCII. This emulation seems to work well. Support for specific printers is possible. There are three distinct types o…
-
Attempting to get an ESP32 Pen/Laser Controller up and running with a solenoid. It appears there may have been some changes along the way.
In pen_laser.h, for example:
```
For pen mode be sure to …
-
As discussed here ( https://github.com/sameer/svg2gcode/issues/23#issuecomment-953073378 ) the appended 'M2' (End of program) is correct. The way the servo on my pen plotter reacts to the M2 is correc…
-
In my search for an hanging all in one Wall V-Plotter. Always skipt this project thinking it was only for round coasters. I wanted to make it wireless (Battery or Power-line only, or get its power fro…
-
I have a core-xy machine with limit switches located at the front left. Configured grbl 1.1f to home Y first followed by X. Works 99.9% of the time. Occasionally it will ram and break the X limit swit…
-
Hi,
could postprocessing filter for tool path optimalisation be added to slic3r?
At least simple one could filtr unneccessary moves such as these:
1) extruder starts at point A, then moves to point B…
-
When I use a path using a very long and continuous line get Axidraw to be very jerky and slow while printing.
It make a nasty and unusual sound. The saxi preview move normally but the actual printer…
TarGz updated
2 years ago
-
It'd be nifty for people to be be able to put in some text or an image and get a meaningful gcode output, for things like drawing with a pen (or painting) on a page, or printing a design onto some fab…