-
### Version
2.7.0
### Branch
master
### OS
Raspberry Pi OS Lite - 32 Bit Bullseye
### Pi model
Zero 1
### Hardware
Raspberry Pi Zero WH + Pirate Audio Mini-Amp with Display ā¦
-
Beta version of snap, following [Wiki](https://github.com/canonical/matter-pi-gpio-commander/wiki/Setup-and-control-a-lighting-device):
```
$ sudo snap install matter-pi-gpio-commander --beta
matteā¦
-
Dear all, I have one of my BTT Pi inside a Klipper machine, working with the code you provided to make the fan run, without any problem, but, I have a concern, when you are developing something, or siā¦
-
Adding controls to shutdown the pi via the LCD would allow the entire setup to be turned off without use of the web interface or an ssh connection, allowing klipper to be used independent of a laptop/ā¦
-
Is this Program still working?
I have installed the raspbian OS on my raspberry pi 4. Furthermore I installed the cec-client and xdotool as recommended. I see my Samsung TV on address 0.0.0.0 active ā¦
-
First aim is to reproduce some results from Dheeshjith et al. 2024 (https://arxiv.org/abs/2405.18585) except using for ACCESS-CM2.
Dheeshjith et al. used GFDL-CM2.6 data (PI, 2xCO2, and 4xCO2). Theā¦
-
After restarting Firefox with tab groups created, all grouped tabs are hidden, and their control tab can't be found and fails to function if manually loaded using the control tab's former address. (egā¦
-
**Describe the bug**
Raspberry Pi Hat Screen UI gets "stuck" on main menu.
**Installation Method**
I used the V1.5.1 system image, I used Win32 Disk Etcher to put the image onto my SD card.
**ā¦
-
Add a control in the GUI to make the SD card writeable when you configure, then set it back to non writeable when done. This will prevent SD card corruption on power loss. WPILIB pi image currentlā¦
-
I just got two mg995 servos in my pose'n'stay skeleton, one for jaw, one for head movement left and right.
I am using a pca9685 to control the two servos, I understand it may be overkill but it doeā¦