-
Please provide the following info.
**_NVidia Geforce Experience version: 3.13.0.85
**Moonlight Embedded version: 2.5.2
Installed onto Bullseye with the instruction below:
https://github.com/m…
-
// Set integer & fractional part of baud rate to 2400 Baud fixed. Divider = 3.000.000 / 2400
// Fractional part = 0. In contrary to the documentation, there is no additional divider by 16
…
-
error code follows:
pi@raspberrypi:~/python/RPIO $ sudo python setup.py install
running install
running bdist_egg
running egg_info
creating source/RPIO.egg-info
writing source/RPIO.egg-info/PKG-INFO
w…
-
Running script RPIO/source/scripts/rpio with option --sysinfo results in an error:
```
pi@raspberrypi:~/RPIO/RPIO/source/scripts $ rpio --sysinfo
Script not started as root. Running sudo...
Traceb…
-
Hello,
I would like to configure a raspberry pi 3 in slave mode BLE to simulate a sensor, but it seems not possible do to it with gatt-python. Do you know how to do it ?
Thank you in advance.
M…
-
Hello,
I'm testing with streaming music using a2dp over bluetooth on the Pi3. When Wifi is enabled, I get constant buffer underruns wit Pulseaudio (Blueman shows a downstream of around 34kB/s). As so…
-
Hi Guys.
I have a problem with this script. Wenn i put in terminal :
`sudo sh philips.py --host 192.168.10.35 pair`
then recives
```
from: can't read /var/mail/__future__
from: can't read /var/m…
-
/home/upm/build $ sudo cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_BUILD_TYPE=DEBUG -DCMAKE_C_COMPILER=/usr/bin/clang -CMAKE_CXX_COMPILER=/usr/bin/clang++ ..
On running cmake command got the bel…
-
This might be specific to me, I wanted to test drive this on the Pi3 that i had laying in a drawer and it seems to work better than i was able to get it to run on stock Rasperry Pi OS, however I notic…
-
pqasyncnotifier doesn't work on raspberry pi3.
I have tried compiling it like this(after commenting out the include of twosigma.h):
gcc -O2 -I /usr/include/postgresql -lpq pqasyncnotifier.c -o pqasy…