-
The example code from https://github.com/raspberrypi/pico-examples/blob/master/pico_w/wifi/access_point/picow_access_point.c#L293 shows the default IP address for the DHCP server is 192.168.4.1. When …
-
### The problem
I bought an uart 24ghz mmwave sensor and bh1750 light sensor. i tried to set them up in yaml. but when i added i2c to the conf the logs said:
WARNING Can't connect to ESPHome AP…
-
It seems that windows 7 requires a driver for the board(pico_w)!
-
Setup:
Linux (GENTOO, Linux kernel 6.10.2)
kitty 0.35.2
zsh 5.9
picocom 3.1
Raspberry Pie Pico W
Zeptoforth 1.7.0
Setting up the Pico W:
Using Zeptoforth 1.7.0 big full usb uf2 to flash the …
-
cmake .. -DPICO_BOARD=pico
PICO_SDK_PATH is /home/pi/pico-sdk
PICO platform is rp2040.
Build type is Release
PICO target board is pico.
Using board configuration from /home/pi/pico-sdk/src/boar…
-
I am trying to get the example running on a Pico W, using the instuctions here: https://book.drogue.io/drogue-device/dev/examples/rp2040/pico-w/app/README.html
I am using the "Running with UF2 imag…
-
### The problem
I try to use an ina219 with my Pico W and ESPHome.
It wired to GP6 and GP7 which is the I2C1 on the Pico W.
When I configure this in yaml, it stops booting correctly.
No usable l…
-
The Writer works great on a Pico with an OLED 128x64 and an SH1106 driver.
It refuse to work on a Pico W. Tried MicroPython v1.21.0, v1.20.0 and v1.19.1
No matter what firmware I use it gives me…
-
Hi everyone, I have a simple question:
Is there any way to use Pyrebase on a Pi Pico W using Micropython? I don't see any information online, so I'm not sure if it's a stupid question.
After imp…
-
### Port, board and/or hardware
Raspberry Pi Pico W
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; Raspberry Pi Pico W with RP2040
### Reproduction
1. Connect to a BLE peripheral usin…