-
Hi all
I've just had an AIO installed and want to connect it to openHAB using MQTT.
I've not used Docker and although I managed to pull the image into Docker, I can't find away to configure the code…
-
Goedemorgen Edwin,
Na het bouwen van de flows op basis van Power Reduce Limit gaat de [set] Limit
na 2 minuten terug naar 100% , de Active Power Limit kan ik niet meer wijzigen.
Klopt dit? m…
-
Since there is real data about electrical energy exchange between Germany and foreign countries, this data should be downloaded and stored in order to be used in eTraGo later on.
-
This issue can be used to track the list of missing PSAT models:
### Loads
- [x] Thermostatically Controlled Load
### Machines
- [ ] Synchronous Machine order V, Type 3
- [ ] Synchronou…
-
Future release will include phase-shifted power flow described in the original paper.
-
### Dev Home version
_No response_
### Windows build number
_No response_
### Other software
_No response_
### Steps to reproduce the bug
Easiest way is to attempt to create an environment, the…
-
### Dev Home version
_No response_
### Windows build number
_No response_
### Other software
_No response_
### Steps to reproduce the bug
I tried to clone the DevHome repo to a devbox using dev…
-
BMeters Hydrocal M4
Using driver hydrocalm3
The data for heating is decoded properly, but cooling isn't. Same for the current volujme and power.
The device is showing 0.139 kWh of cooling energ…
-
Hi, not able to trigger The flow-card «hue changed» or «white balance changed», according to The instructions double clicking the button/wheel shoud trigger it but i cant make it happen. Trying to con…
-
Great work here, first of all.
I would like to be notified if the system is feeding to the grid (or pulling power from the grid), and the cleanest way to do this, it seems, would be to expose HomeK…