-
I am able to register but unable to login. The number is also not banned as i am able to register again.
It used to work fine.
I am using the latest build from the master.
Here is the logs:
…
cijo7 updated
4 years ago
-
Followed every step. Port 27015 was opened for Palworld so I know that port works. 7777 is also port forwarded and opened on the firewall via rules (im running this off a Dell Poweredge r720 along w…
-
I send the same # of packets each time (15000000) and tcpdump reports the correct amount while netsniff-ng reports an extra 2 or 4 packets.
rx: 972.748 MiB 15000000 pkts 0 d…
-
I have just rebuilt one of my hosting servers using Ubuntu 18.04 and added latest virtualbox 5 and phpvirtualbox ... everything 'seems' to be running ok, however, i get some weird behavior that I dont…
-
Hello again,
So we have our lancache working now via the lancache installer from nexus, but suddenly new games that aren't currently cached are taking forever to download. We tested without lancach…
-
Hi @ufrisk ,
first of all, i really appreciate your great work!
Did you manage to get hot plugging to work with the AC701 / FT601 PCIe FPGA device?
I tried several workstations (Dell Optiplex…
-
I know this lsirec tool was not intended to be used with LSI SAS2208 chipset, but since there are lots of similarities between 2008/2108 and the 2208/2308, i tried using lsirec to read the SBR off a 2…
-
Type | Version/Name
--- | ---
Distribution Name | vpsAdminOS/NixOS
Distribution Version | master
Linux Kernel | 5.10.25+ (running .37 currently)
Architecture | x86_64
ZFS Version | master H…
-
I am having issues using lm_sensors on XCP-ng. I always end up with `No sensors found!...`
I tried loading coretemp with modprobe and I encountered the coretemp error described in issue #249. I ins…
-
I am attempting to use the following for auto installation and it keeps saying that the UEFI bootloader ~ "autoinstall config did not create needed bootloader partition". What is it that I need to adj…